Masonry Installation Services › Fireplace Installation Service
Fireplace Installation Service in Nashville, TN
A masonry fireplace is a firebox, smoke chamber, and chimney system built from brick or stone directly into your home's structure. It's not a prefab insert dropped into a chase — it's site-built masonry that becomes part of the house. Done right, it lasts decades. Done wrong, it's a smoke and carbon monoxide problem.
Nashville Masonry Pros provides fireplace installation service for homeowners across Nashville, TN. Call for a free inspection and a written quote before any work begins.
When to Call
When You Need Fireplace Installation Service
- You're finishing a basement and want a real wood-burning fireplace added
- Your older Nashville home had a fireplace removed and you want it rebuilt
- You're building an addition and the contractor needs a masonry sub for the fireplace
- Your current firebox is crumbling and repair is no longer practical or safe
- You want a gas-log masonry fireplace built into a new great room
- A home inspection flagged your fireplace as structurally unsound and not repairable
How It Works
Our Process for Fireplace Installation Service
- 1
Site Visit and Structural Review
We come out and look at where you want the fireplace, check floor joists, ceiling height, and roof line. We won't quote without seeing the actual space.
- 2
Design and Code Check
We confirm the firebox dimensions, hearth extension, and flue sizing meet current IRC requirements. Nashville has specific inspections for new fireplace installations.
- 3
Foundation and Firebox Work
We pour or prep the hearth base, lay the firebox with refractory brick, and build the smoke shelf and chamber before any visible brickwork begins.
- 4
Chimney Construction
The chimney is built up through the house or exterior, flue liner is set, and flashing is properly integrated with your roof — not just caulked over.
- 5
Inspection and Smoke Test
We schedule the required city or county inspection. We also do a real smoke test before calling it done, not just a visual check.
- 6
Cleanup and Walkthrough
We clean up the work area and walk you through how to operate the damper, when to cure the firebox with small fires, and what to watch for.
What's included
- Full firebox construction using refractory brick rated for the application
- Smoke chamber and smoke shelf built to proper draft geometry
- Flue liner installation from firebox to chimney crown
- Chimney cap installation to keep water and animals out
- Hearth extension in brick or stone to meet code setback requirements
- Coordination with required municipal inspection — we pull the permit
What's not included
- Gas line rough-in or gas appliance installation — that requires a licensed plumber or gas fitter
- Drywall, paint, or finish carpentry around the fireplace surround — we stop at the masonry
- Mantel installation unless it's a masonry or stone mantel we're building
Real Situations
Common Scenarios in Nashville
A homeowner in Sylvan Park is finishing their basement and wants a wood-burning fireplace on an exterior wall that currently has no opening.
We assess the foundation and determine whether a new footing is needed under the firebox. We frame the opening into the discussion with the general contractor early, because the framing crew needs to stay out of our way, not the other way around. The chimney in this case runs up the exterior, which simplifies the roof penetration.
A family in Bellevue bought a 1960s ranch where the original fireplace was poorly rebuilt by a previous owner and is now drafting smoke back into the room.
We inspect the smoke chamber and flue geometry first. Often a bad rebuild left the smoke shelf at the wrong angle or the flue undersized. If the firebox itself is salvageable, we may only need to rebuild the smoke chamber and reset the liner. If the firebox is compromised, we take it down to the hearth and start over.
A contractor building a new custom home in Brentwood needs a masonry fireplace roughed in before drywall, on a tight schedule.
We coordinate directly with the GC on the sequencing — foundation, framing, then our firebox work before insulation. We've done enough new construction to know how to stay on the schedule without cutting corners on the masonry. We also make sure the framing crew leaves the right clearances before we show up.
Nashville Context
Why this matters in Nashville
Nashville's housing stock includes a lot of mid-century brick ranches where original fireplaces are aging out and newer infill homes where buyers expect one. The area's clay-heavy soil means foundation prep under a firebox has to be taken seriously — settling is common in older neighborhoods like Inglewood and East Nashville. Winters here aren't brutal, but a poorly drafted fireplace will make itself known fast when temperatures drop.
Straight Talk
About pricing & scope
What drives the cost of a fireplace installation is where it sits in the house, how much structural work the foundation needs, and how far the chimney has to travel to clear the roofline. A basement fireplace with an exterior chimney is a different job than a two-story interior chimney. Scope can change if we open a wall and find framing that needs to move.
What This Fixes
Problems We See in Nashville
More Masonry Installation Services
Fireplace Installation Service Near You